BQFMG - SATIN PLUS WHITE BEIGE
- MSDS: BQFMG
- Manufacturer: VALSPAR CORP
- Product Name: SATIN PLUS WHITE BEIGE
- National Stock Number: 8010-00B220098
Product Identification
Product ID:SATIN PLUS WHITE BEIGE
MSDS Date:03/07/1990
FSC:8010
NIIN:00B220098
MSDS Number: BQFMG
Responsible Party
MINNEAPOLIS, MN 55415
US
Emergency Phone: 800-228-5635
Info Phone: 612-332-7371
Cage: 13374
Contractor
Telephone: 800-228-5635
Cage: 06758
Ingredients
CLAY
CAS: 22708-90-3
Fraction By Weight: 10%
SILICONE DIOXIDE
CAS: 68855-54-9
Fraction By Weight: 5%
OSHA PEL 10 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 5 - 10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 50 - 55%
NEPHELINE SYENITE
CAS: 37244-96-5
Fraction By Weight: 5%
VINYL ACRYLIC COPOLYMER
CAS: 25067-01-0
Fraction By Weight: 5%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE, SKIN IRRITANT. VAPORS MAY
IRRITATE RESPIRATORY TRACT CAUSING HEADACHE, NAUSEA AND DIZZINESS.
THIS PRODUCT MAY BE FATAL FROM SWALLOWING LARGE AMOUNTS. MAY CAUSE
NAUSEA, VOMITING, HEADACHES, DIZZINESS, STUPOR, AND KIDNEY DAMAGE.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
LISTED BY IARC, NTP, OR OSHA AS A SUSPECTED OR KNOWN CARCINOGEN.
Effects of Overexposure:EYE, SKIN AND LUNG IRRITATION. CONTINUED
BREATHING OF VAPORS MAY IRRITATE RESPIRATORY TRACT CAUSING
HEADACHE, NAUSEA AND DIZZINESS. THIS PRODUCT MAY BE FATAL FROM
SWALLOWING LARGE AMOUNTS. MAY CAUSE N AUSEA, VOMITING, HEADACHES,
DIZZINESS, STUPOR, AND KIDNEY DAMAGE.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF AILMENTS
OR WITH A PRE-EXISTING DISEASE INVOLVING THE EYES, SKIN,
RESPIRATORY TRACT OR KIDNEY MAY BE AT INCREASED RISK FROM EXPOSURE.
First Aid
First Aid:INHALATION:REMOVE TO FRESH AIR. RESUSCITATE IF NOT BREATHING.
EYES:IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR 15 MINUTES HOLDING
EYELIDS OPEN. GET MEDICAL ATTENTION. SKIN:REMOVE CONTAMINATED
CLOTHING. WASH WITH SOAP AND WATER. INGESTION: INDUCE VOMITING.
GIVE 1 OR 2 GLASSES OF WATER IF CONSCIOUS. GET IMMEDIATE MEDICAL
HELP.
Fire Fighting
Flash Point Method:TCC
Flash Point:205F,96C
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.
Accidental Release
Spill Release Procedures:WEAR APPROPRIATE PERSONAL PROTECTION
EQUIPMENT. CONTAIN SPILL WITH INERT ABSORBENT MATERIAL AND PUT INTO
VAPOR TIGHT CONTAINERS. PREVENT MATERIAL FROM CONTACTING ANY WATER
SOURCES OR STORM SEWERS.
Neutralizing Agent:NOT APPLICABLE.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT STORE ABOVE 120F, KEEP FROM FREEZING. PROTECT FROM
PHYSICAL DAMAGE.
Other Precautions:DO NOT TAKE INTERNALLY. DO NOT BREATHE MIST. AVOID
PROLONGED OR REPEATED BREATHING OF VAPOR. AVOID CONTACT WITH EYES.
USE WITH ADEQUATE VENTILATION. WASH THOROUGHLY AFTER HANDLING. READ
MANUFACTURER'S SAFETY PRECAUTIONS BEFORE USE.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS TO REMOVE
SOLID AIRBORNE PARTICLES OF OVER SPRAY DURING SPRAY APPLICATIONS.
IN RESTRICTED VENTILATION AREAS USE NIOSH/MSHA APPROVED RESPIRATOR
DESIGNED TO REMOVE BO TH PARTICLES AND VAPOR.
Ventilation:SUFFICIENT VENTILATION IN VOLUME AND PATTERN SHOULD BE
PROVIDED TO KEEP AIR CONTAMINATION BELOW OSHA'S CURRENT PELS.
Protective Gloves:IMPERVIOUS NATURAL RUBBER GLOVES.
Eye Protection:SAFETY GOGGLES WITH OPTIONAL FACE SHIELD
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT BY USING
CLEAN WORK CLOTHING, INCLUDING A HAT.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING OR USING
WASHROOM FACILITIES. DO NOT WEAR CONTAMINATED CLOTHING OR FOOTWEAR.
Supplemental Safety and Health
DO NOT HANDLE UNTIL MANUFACTURES SAFETY PRECAUTIONS HAVE BEEN READ AND
UNDERSTOOD. PROVIDE ADEQUATE VENTILATION OR RESPIRATORY PROTECTION
TO REMOVE DECOMPOSITION PRODUCTS DURING WELDING OR FLAME CUTTI NG
COATED SURFACES. DO NOT STORE OR USENEAR HEAT, SPARKS, OR FLAMES.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:24.0
Vapor Density:.6
Spec Gravity:1.32
Evaporation Rate & Reference:.4
Solubility in Water:APPRECIABLE
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT
Percent Volatiles by Volume:70.86
Stability
Stability Indicator/Materials to Avoid:YES
WATER-REACTIVE MATERIALS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES, INCLUDING
CARBON DIOXIDE AND CARBON MONOXIDE, WHEN HEATED.
Disposal
Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH ALL
APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.